Description
Gloss: ★★★★★
Ease of application: ★★★★☆
Hydrophobicity: ★★★★★
Self-cleaning properties: ★★★★☆
Hardness: 7H
Thickness: up to 1 micron
Durability: 2 years
Efficiency: 2 cars!
In set:
4nano Camo 30ml
Certificate 2 pc.
Flyer "How to take care od the coating" 2 pc.
4nano Holograms 2 pc.
4nano Camo is a unique hybrid ceramic coating with a functional hydrophobic layer created in the latest 4nano Hyper Hydrophobic technology. Incredible glassiness and spectacular hydrophobic effect combined with the maximum protection against micro-scratches, harmful external factors, UV radiation, chemicals and road salt are its main advantages. The durability of 4nano Camo is at least 2 years, and the hydrophobic effect lasts up to 18 months! Great self-cleaning properties and extremely easy and quick washing are its next advantages. All of this with the application of just one layer! Trust proven solutions and coatings available and constantly developed since 2011.
Instructions for use 4nano Camo:
4nano Camo application should be carried out under appropriate temperature and humidity conditions. It is also important to ventilate the room in which we carry out the application. The varnish must be prepared and cleaned using a 4nano Scrub.
TEMPERATURE AND AIR HUMIDITY: Temperature +15° C to +30 ° C. Air humidity between 30-80%. Application of the coating outside the specified ranges may result in a failure.
SURFACE PREPARATION: A well-prepared varnish will be free of tar, loose dirt, metallic impurities, dry and completely sterilized from other types of wax or factory protection. The final cleaning of the surface before securing must be done with 4nan Scrub (Alkaline or Neutral depending on the varnish condition).
APPLICATION: Shake the bottle vigorously before proceeding with the application. Apply a few drops of 4nano Camo on the included applicator and spread it over the area of not greater than 30 x 30 cm to form a thin but airtight layer. Leave for 3 minutes (+ 30 ° C) for 5 minutes (+ 15 ° C) and then remove the residue with 3 microfiber cloths. Do not attempt to remove all excess product with a single cloth. Using the first cloth, lightly collect excess product, leaving imperfections on the surface. Then, with the second cloth, collect most of the excess product. With a third cloth, polish the surface to the ideal so that there are no streaks or smears left. Make sure that all imperfections (both on neighboring elements) have been thoroughly removed. After finishing the application, the car should stay in the garage for a minimum of 12 hours in order to ensure the best binding conditions, especially in the winter season. Full bond of the ceramic coating occurs after 14 days and during this time, DO NOT wash or rinse the car. Of course, the car can be used normally.
Before use, Test the product on a small area before use. Do not apply on heated surfaces. Do not apply in direct sunlight. Keep away from children. If swallowed, rinse your mouth and drink plenty of water, immediately consult a physician. In case of contact with the eyes, rinse thoroughly with water and seek medical advice. In case of contact with the skin, rinse with plenty of water, call a physician in case of complaints. Store in a dry, cool place.